Black Acrylic Kitchen Splashback (Gloss Finish)

starstarstarstarstarRated by 3 customers

With a deep gloss finish, this black acrylic splashback gives a premium feel.

100 100 in stock

Rectangle (Standard Sheet)

cm
mm
inches

Specify your corner radii in mm.
We will assume the orientation of your sheet matches the diagram below. To leave a corner square enter a value of 0.

Please note, there is not a standard radius. If you are unsure, we would recommend that the radius is equal to the sheet thickness. I.e. 3mm thick material would have a 3mm radius corner.

Rounded edges box

1000mm

1000mm

NB Drawing is not to scale.

mm
mm
mm
mm

This feature gives you the ability to have your sheet pre-drilled with four holes (one in each corner) for easy mounting.

For panels with a longest side of over 1000mm we recommend two extra holes for wall mounting to reduce flex. These will be placed half way along the longest side at no extra charge. If you require these extra holes please specify in the special instructions at the checkout.

mm
mm
Drill location square
Specify your location for these holes by entering a value in mm for the distance between the edge of the sheet and the center of the hole as shown in the diagram by x or y.

Please note: If you do not upload a sketch, we will contact you via email to arrange this after your order has been placed. This may delay your order.
Sheet Cost: £34.78 Inc. VAT
£28.98 Excl. VAT
Quantity:

Circular Sheets

cm
mm
inches
Sheet Cost: £34.78 Inc. VAT
£28.98 Excl. VAT
Excl. Cutting Cost: £10.95 per unique size
Quantity:

Bespoke

We have the knowledge, experience and technology to offer a bespoke design and fabrication service for plastic sheets to cater for almost any idea you can think of.

Please provide as much information on your size and design requirements and we will get back to you with a no obligation quote within 2 working days. You may also upload up to 5 files containing sketches or technical drawings to assist our designers with providing an accurate quote.

Here are some of the services we offer:
  • • Cut outs for sockets
  • • CNC laser cutting
  • • Laser engraving
  • • Diamond polishing
  • • Digital printing
  • • Drilling
  • • Heat bending

Upload files (Optional). Each image must be less than 8MB in size in order for it to upload.

Highly decorative and resistant to chemical and impact damage, acrylic splashbacks are perfect for use in any kitchen, and can be easily installed without any prior DIY experience.

Key Features:

  • Impact and chemical resistant
  • Durable and lightweight material
  • Easy to clean with soapy water and soft cloth
  • Hygienic and food safe
  • Sheet manufacturing process: Extruded
  • Supplied with protective film on both sides

As practical as they are pleasing to the eye, these splashbacks are incredibly durable and have a vibrant colour that will never tarnish or fade.

Acrylic has many beneficial qualities, one of which being the difficulty with which the material can become stained, and the ease with which it can be cleaned when it does. Dust and dirt does not adhere to acrylic as readily as they would to steel or glass (which are other prominent splashback materials). Even when they do, they can be removed easily, by nothing more than a slightly moistened cloth.

It is important that you do not use a scourer or rough sponge to clean these splashbacks, as they will scratch the acrylic and impact upon the colour clarity and gloss finish.

Additionally, if these splashbacks are placed less than 150mm away from a hob or other heat source, a layer of glass should be placed between it and the heating element; to protect it and prevent the acrylic from burning or becoming soft.

Overall acrylic is a very hygienic option, as in addition to being easy to clean, it is highly  water resistant and does not encourage the growth of bacteria. It also cannot break in the same way glass can, so it is safe to have in a house with children and pets.

Fitting
Acrylic splashbacks can be easily fitted, without the need for professional help, directly to almost any flat surface using our versatile and durable double sided PE foam tape. Check out our splashback fitting guide to see just how easy it is to fit splashbacks yourself.

Please Note: We recommend all acrylic splashbacks are not installed closer than 150mm to an open heat source such as a gas/electric hob.

Applications

  • Kitchen splashbacks
  • Shower, bathroom, and sink splashbacks
  • Kitchen worktop and breakfast bar upstands

What our customers say about our service...

"This is an excellent service and I won't hesitate to use you again in the future. Thank-you for a fast and trouble free problem resolution."
Doug
Black Acrylic Kitchen Splashback (Gloss Finish)

Customer Reviews

5.0000 5 starstarstarstarstar 5.0/5

Based on 3 reviews

Share your opinion on this product and review it here

Black Acrylic Kitchen Splashback (Gloss Finish) 5 star5 star5 star5 star5 star 5

black splashback

Reviewed by newf on 15 Jun 2016

looks great when in use being able to get exact size wanted cut makes installing easy good quality and choice of thickness.

Black Acrylic Kitchen Splashback (Gloss Finish) 5 star5 star5 star5 star5 star 5

Black upstands

Reviewed by Anonymous on 09 Dec 2015

Ordered several cut pieces for my kitchen. Delivered fast, cut exactly right. Excellent service all round!

Black Acrylic Kitchen Splashback (Gloss Finish) 5 star5 star5 star5 star5 star 5

Splashback

Reviewed by Anonymous on 06 Oct 2014

This was just what we wanted for the kitchen. Easy to cut out the socket hole with the jigsaw, not as fragile as I thought it would be. Pleased with the results. Quick delivery, well packaged. Thanks

Delivery Rates

Standard UK Mainland

Delivery Service        Est. Delivery Time Cost (exVAT) Cost (incVAT)
Economy 5 - 7 working days £10.89 £13.07
Standard 3 - 4 working days £16.95 £20.34
Express 1 - 2 working days* £29.85 £35.82
Nominated (Mon-Fri) N/A £20.00 £24.00
Nominated (Sat) N/A £25.00 £30.00
FREE ECONOMY DELIVERY ON ALL ORDERS OVER £100

*For orders placed before 12pm (Midday). For orders placed after 12pm (Midday) this service is 2 - 3 working days.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from our customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadlines are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no questions asked.

How quickly will my order arrive?

We now offer several delivery services to best suit our customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 917434 or info@cutplasticsheeting.co.uk for more information.

Nominated Delivery (request a delivery date)

Our nominated delivery service allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm (Midday) then the earliest available date will be 4 working days from the current date. If your order is placed after 12pm (Midday) then the earliest available date will be 5 working days from the current date.

Sundays and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 917434 or info@cutplasticsheeting.co.uk. Please include your full name and order number in all communications with us.

Packaging information

We have an excellent relationship with our courier service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select 'collect in person' from the delivery options in the checkout. All orders collected in person will not incur any delivery charges.

Q. Is acrylic sheeting suitable for use as a splashback behind a hob or oven?

A: No. Temperatures of over 60°C will affect acrylic, so it is not suitable for use in close proximity to heatsources. A popular solution is to protect the acrylic splashback directly behind the heat source with a sheet of toughened glass.

Q. If I do want to use it near a heat source, what is a suitable distance?

A: While we insist that acrylic is not suitable as a splashback behind a heat source, if you do wish to use behind a heat source it's recommended that one metre clearance is allowed.

Q. How do I clean my acrylic kitchen splashback?

A: Acrylic is incredibly easy to wipe clean and keep in a good condition. Just use a soft, non-abrasive, anti-static cloth, along with a mixture of washing up liquid and water. If you wish to use cleaning products, please check that they are suitable for the material first.

Ask a question about this product

  • All questions answered within 24hrs (Mon - Fri).
  • We will only use your email address to respond to the question.
  • Questions may be displayed on the website after moderation (name and email address will not be dispayed).
  • Looking for a different thickness?