White High Gloss Acrylic Kitchen Splashback

starstarstarstarstarRated by 2 customers

Strong and durable high gloss acrylic splashback in white, suitable for kitchen use.

100 100 in stock

Rectangle (Standard Sheet)

cm
mm
inches

Specify your corner radii in mm.
We will assume the orientation of your sheet matches the diagram below. To leave a corner square enter a value of 0.

Please note, there is not a standard radius. If you are unsure, we would recommend that the radius is equal to the sheet thickness. I.e. 3mm thick material would have a 3mm radius corner.

Rounded edges box

1000mm

1000mm

NB Drawing is not to scale.

mm
mm
mm
mm

This feature gives you the ability to have your sheet pre-drilled with four holes (one in each corner) for easy mounting.

For panels with a longest side of over 1000mm we recommend two extra holes for wall mounting to reduce flex. These will be placed half way along the longest side at no extra charge. If you require these extra holes please specify in the special instructions at the checkout.

mm
mm
Drill location square
Specify your location for these holes by entering a value in mm for the distance between the edge of the sheet and the center of the hole as shown in the diagram by x or y.

Please note: If you do not upload a sketch, we will contact you via email to arrange this after your order has been placed. This may delay your order.
Sheet Cost: £116.98 Inc. VAT
£97.48 Excl. VAT
Quantity:

Circular Sheets

cm
mm
inches
Sheet Cost: £116.98 Inc. VAT
£97.48 Excl. VAT
Excl. Cutting Cost: £10.95 per unique size
Quantity:

Bespoke

We have the knowledge, experience and technology to cut sheets to any shape possible. Please provide as much information on your size and design requirements and we will get back to you with a no obligation quote within 2 working days. You may also upload up to 5 files containing sketches or technical drawings to assist our designers with providing an accurate quote.

Upload files (Optional). Each image must be less than 8MB in size in order for it to upload.

Using acrylic for a kitchen splashback is an increasingly popular choice, with the properties of the material being perfectly suited to kitchen use.

Key Features:

  • Strong and durable material
  • Easy to clean and hygienic
  • Lightweight, but damage resistant
  • High gloss attractive finish
  • Supplied with protective film on both sides

Acrylic is a strong and durable material that can stand up to the wear and tear it might receive in the kitchen.

Extruded acrylic is easy to care for and keep in good condition. It will be less susceptible to dust and grease, something glass and stainless steel splashbacks struggle to achieve. And when it does get marked or slightly dusty, it is simple to clean with a wet cloth.

Something that is incredibly important in the kitchen is hygiene, and acrylic offers an extremely hygienic option. It is also water resistant and can be used behind hobs as long as it is protected by glass or used at a suitable distance.

Along with the above benefits, acrylic splashbacks are lightweight and incredibly easy to install at home. This means that those with a limited knowledge of DIY will be able to fit them quickly and easily to create a new look in the kitchen.

This high gloss acrylic will create a deep, long lasting colour that looks fantastic in any kitchen.

Fitting
Acrylic splashbacks can be easily fitted, without the need for professional help, directly to almost any flat surface using our versatile and durable double sided PE foam tape. Check out our splashback fitting guide to see just how easy it is to fit splashbacks yourself.

Please Note: We recommend all acrylic splashbacks are not installed closer than 150mm to an open heat source such as a gas/electric hob.

Colour of sheets may differ slightly due to variances in your computer display.

Applications

  • Kitchen splashbacks
  • Shower, bathroom, and sink splashbacks
  • Kitchen worktop and breakfast bar upstands

What our customers say about our service...

"Thank you for your excellent service, all the parts you supplied fitted perfectly. Will recommend you to my friends."
Mike Thomas
White High Gloss Acrylic Kitchen Splashback

Customer Reviews

5.0000 5 starstarstarstarstar 5.0/5

Based on 2 reviews

Share your opinion on this product and review it here

White High Gloss Acrylic Kitchen Splashback 5 star5 star5 star5 star5 star 5

Exceptional

Reviewed by Anonymous on 21 Dec 2015

An exceptional and faultless service. Thank you very much to everyone at Cut Plastics Sheeting

White High Gloss Acrylic Kitchen Splashback 5 star5 star5 star5 star5 star 5

Perfect kitchen splash backs!

Reviewed by Rick on 15 Mar 2015

I was debating what to use as kitchen splashback is in my new kitchen. Some folks were urging me to go with the traditional tiles, but I'm not a huge fan of tiles. After just a few years the grouti...
See full review

Delivery Rates

Standard UK Mainland

Delivery Service        Est. Delivery Time Cost (exVAT) Cost (incVAT)
Economy 5 - 7 working days £10.89 £13.07
Standard 3 - 4 working days £16.95 £20.34
Express 1 - 2 working days* £29.85 £35.82
Nominated (Mon-Fri) N/A £20.00 £24.00
Nominated (Sat) N/A £25.00 £30.00
FREE ECONOMY DELIVERY ON ALL ORDERS OVER £100

*For orders placed before 12pm. For orders placed after 12pm this service is 2 - 3 working days.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from our customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadlines are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no questions asked.

How quickly will my order arrive?

We now offer several delivery services to best suit our customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 894463 or [email protected] for more information.

Nominated Delivery (request a delivery date)

Our nominated delivery service allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm then the earliest available date will be 4 working days from the current date. If your order is placed after 12pm then the earliest available date will be 5 working days from the current date.

Sundays and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 894463 or [email protected] Please include your full name and order number in all communications with us.

Packaging information

We have an excellent relationship with our courier service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select 'collect in person' from the delivery options in the checkout. All orders collected in person will not incur any delivery charges.

Q. Is acrylic sheeting suitable for use as a splashback behind a hob or oven?

A: No. Temperatures of over 60°C will affect acrylic, so it is not suitable for use in close proximity to heatsources. A popular solution is to protect the acrylic splashback directly behind the heat source with a sheet of toughened glass.

Q. If I do want to use it near a heat source, what is a suitable distance?

A: While we insist that acrylic is not suitable as a splashback behind a heat source, if you do wish to use behind a heat source it's recommended that one metre clearance is allowed.

Q. How do I clean my acrylic kitchen splashback?

A: Acrylic is incredibly easy to wipe clean and keep in a good condition. Just use a soft, non-abrasive, anti-static cloth, along with a mixture of washing up liquid and water. If you wish to use cleaning products, please check that they are suitable for the material first.

Ask a question about this product

  • All questions answered within 24hrs (Mon - Fri).
  • We will only use your email address to respond to the question.
  • Questions may be displayed on the website after moderation (name and email address will not be dispayed).
  • Looking for a different thickness?

Design & Fabrication

Despite our name, at Cut Plastic Sheeting we can do much more than just cut to size sheets.

We also offer a bespoke design and fabrication service for plastic sheets to cater for almost any idea you can think of.

We have access to some of the UK's leading plastic engineers and designers to bring your project to life and our highly adaptable team can cater for all projects no matter how big or small.

Here are some of the services we offer:

  • Cut outs for sockets
  • CNC laser cutting
  • CNC routing
  • Laser engraving
  • Diamond polishing
  • Digital printing
  • Drilling
  • Heat bending

Please get in touch to discuss your requirements.

email: [email protected]

phone: 01752 917434