White Dibond Aluminium Composite Panel

starstarstarstarhalfstarRated by 11 customers

Standard white aluminium composite board for a lightweight and weatherproof solution to printing and display.

image of White Dibond Aluminium Composite Panel

Customer photos

100 100 in stock

Rectangle (Standard Sheet)


Specify your corner radii in mm.
We will assume the orientation of your sheet matches the diagram below. To leave a corner square enter a value of 0.

Please note, there is not a standard radius. If you are unsure, we would recommend that the radius is equal to the sheet thickness. I.e. 3mm thick material would have a 3mm radius corner.

Rounded edges box



NB Drawing is not to scale.


This feature gives you the ability to have your sheet pre-drilled with four holes (one in each corner) for easy mounting.

For panels with a longest side of over 1000mm we recommend two extra holes for wall mounting to reduce flex. These will be placed half way along the longest side at no extra charge. If you require these extra holes please specify in the special instructions at the checkout.

Drill location square
Specify your location for these holes by entering a value in mm for the distance between the edge of the sheet and the center of the hole as shown in the diagram by x or y.
Sheet Cost: £40.34 Inc. VAT
£33.62 Excl. VAT

Circular Sheets

Sheet Cost: £40.34 Inc. VAT
£33.62 Excl. VAT
Excl. Cutting Cost: £10.95 per unique size


We have the knowledge, experience and technology to offer a bespoke design and fabrication service for plastic sheets to cater for almost any idea you can think of.

Please provide as much information on your size and design requirements and we will get back to you with a no obligation quote within 2 working days. You may also upload up to 5 files containing sketches or technical drawings to assist our designers with providing an accurate quote.

Here are some of the services we offer:
  • • Cut outs for sockets
  • • CNC laser cutting
  • • Laser engraving
  • • Diamond polishing
  • • Digital printing
  • • Drilling
  • • Heat bending

Upload files (Optional). Each image must be less than 8MB in size in order for it to upload.

Coated on both sides with a special lacquer, these aluminium composite panels can be printed upon directly, effectively and with extremely vivid clarity. Dibond is a sheet of plastic sandwiched between two sheets of aluminium.

Key Features:

  • Strong and durable
  • Can be directly printed on
  • Gloss finish on one side, matte finish on the other
  • Suitable for range of signage applications
  • Waterproof and windproof, so can be used outdoors
  • Non-corrosive and resistant to damage
  • Supplied with protective film on both sides
  • BS 476 Part 7 Class 1 Fire Rating

As each and every sheet is coated on both sides printing can be accomplished on either of its surface. This is especially handy as each sheet has one matte surface and one glossy one; allowing you to pick the one which will best suit your purposes.

You may already be familiar with this kind of material as it is known by many under various trade names, such as Dilite, Raybond, Raynobond, Dibond Digital, Alucobond or sandwich panel. In essence though all of these are different words for the same thing: A sheet of plastic (called polyethylene) sandwiched firmly in between two thin veneers of aluminium.

Because of the attributes inherent to both of the materials, and also the manner by which the two materials are put together and fused, Dibond sheets retain the positive aspects of both components, allowing it to succeed in situations and environments that neither on the materials individually would be suitable for.

This new found flexibility allows Dibond to be adopted for any one of a whole host of potential projects. Signage is where you will find the majority of these composite sheets being used, and they can typically found on building sites, outside properties for sale & to let, car parks, by road sides, so by and large they are anywhere where a sturdy display is needed for potentially long-term or repeated use.

In addition to its calling as a word-class signage material, these aluminium-polyethylene hybrids are regularly used for cubicle partitions, false-ceilings, exhibition stands and temporary kiosks.

Please Note: Our current machines work to a tolerance of +/- 1mm. Please enter your requirements to the nearest whole mm.

We may sometimes substitute Dibond for other aluminium composite sheets which have almost identical physical properties. If you have any concerns about this please contact our sales team on 01752 917434 prior to ordering.

Colour of sheets may differ slightly due to variances in your computer display.

We have access to almost any grade or brand of Aluminium Composite Panel on the market. If you require a specific product not listed on our website and wish to order by the full sheet, please email Nick.Down@cutplasticsheeting.co.uk or phone our sales team on 01752 917434.


The strength, light weight and rigidity of Dibond Aluminium Composite Sheeting make it a popular choice of material for a variety of applications, including creative projects where it can accommodate image and text printing. These uses include:

  • Internal and external signage
  • Advertising displays
  • Exhibition stands
  • Wall cladding
  • Site hoarding
  • Information boards
  • Estate agents signs
  • Other semi-permanent displays
  • Painting substrate

What our customers say about our service...

"Received the cut sheets on Thursday as expected the sheets were perfectly cut and to size. Thank-you for your super service will use you again without hesitation."
Ray Evans
White Dibond Aluminium Composite Panel

Customer Reviews

4.6364 5 starstarstarstarhalfstar 4.6/5

Based on 11 reviews View All

Share your opinion on this product and review it here

White Dibond Aluminium Composite Panel 4 star4 star4 star4 star 4

Kolor Art Limited

Reviewed by Error sorted quickly on 12 Jul 2017

Product is good delivery error meant was shipped to wrong address however situation was remedied very quickly by helpful customer service. Would continue to use as supplier

White Dibond Aluminium Composite Panel 5 star5 star5 star5 star5 star 5

Make sliding cupboard doors

Reviewed by Anonymous on 03 Feb 2017

We have used the White Dibond Aluminium Composite sheeting to make two sliding doors to an awkward cupboard situated in the corner of the Office where there is no room to fit conventional hinged cu...
See full review

White Dibond Aluminium Composite Panel 5 star5 star5 star5 star5 star 5

Refitting a boat...

Reviewed by MartinB on 15 Nov 2016

I've been upgrading the electronics in our boat and some of the new equipment is smaller than the devices it is replacing. This left me with a problem since the holes cut into the instrument panels...
See full review

White Dibond Aluminium Composite Panel 5 star5 star5 star5 star5 star 5

great product!

Reviewed by leanne on 24 Oct 2016

Arrived when stated, well packaged, cheapest i could find. Perfect cuts to my sizing specification. Used it as a panel within a photobooth and will most definitely be purchasing from this supplier ...
See full review

White Dibond Aluminium Composite Panel 5 star5 star5 star5 star5 star 5

review of Dibond for painting

Reviewed by Dan Young on 18 Jul 2014

I have found the panels of Dibond amazing to paint on, the surface is really slippery and is perfect for some of the effects I am going for. I am using oil paint and making landscape paintings base...
See full review

White Dibond Aluminium Composite Panel 5 star5 star5 star5 star5 star 5

Great product, great service

Reviewed by Rob on 09 Jan 2014

Quick turnaround and everything to order. Prints look fantastic mounted on the dibond

White Dibond Aluminium Composite Panel 2 star2 star 2

Dibond - Excellent product and service but poor quality control

Reviewed by Anonymous on 30 Oct 2013

This is the feedback I had about the product I purchased AFTER I received faulty goods - twice - be prepared. " The raising of the corners as you have photographed is what happens in the act of...
See full review

Delivery Rates

Standard UK Mainland

Delivery Service        Est. Delivery Time Cost (exVAT) Cost (incVAT)
Economy 5 - 7 working days £10.89 £13.07
Standard 3 - 4 working days £16.95 £20.34
Express 1 - 2 working days* £29.85 £35.82
Nominated (Mon-Fri) N/A £20.00 £24.00
Nominated (Sat) N/A £25.00 £30.00

*For orders placed before 12pm (Midday). For orders placed after 12pm (Midday) this service is 2 - 3 working days.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from our customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadlines are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no questions asked.

How quickly will my order arrive?

We now offer several delivery services to best suit our customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 917434 or info@cutplasticsheeting.co.uk for more information.

Nominated Delivery (request a delivery date)

Our nominated delivery service allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm (Midday) then the earliest available date will be 4 working days from the current date. If your order is placed after 12pm (Midday) then the earliest available date will be 5 working days from the current date.

Sundays and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 917434 or info@cutplasticsheeting.co.uk. Please include your full name and order number in all communications with us.

Packaging information

We have an excellent relationship with our courier service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select 'collect in person' from the delivery options in the checkout. All orders collected in person will not incur any delivery charges.

There are currently no FAQ's at present, please fill in the form if you wish to ask us a question about this products

Ask a question about this product

  • All questions answered within 24hrs (Mon - Fri).
  • We will only use your email address to respond to the question.
  • Questions may be displayed on the website after moderation (name and email address will not be dispayed).
  • Looking for a different thickness?
Technical Specifications  
Thickness of Aluminium Layers 0.30mm
Weight 3.80 kg/m2
Technical Properties  
Section Modulus 0.81 cm3/m  
Rigidity 865 kNcm2/m 
Alloy/Temper of Aluminium Layers EN AW-5005A (AIMg1), H42/H44, acc. EN 573-3
Modulus of Elasticity 70,000 N/mm2
Tensile Strength of Aluminium Rm: 145-185 N/mm2
0.2% Proof Stress Rp0.2: 110-175 N/mm2
Elongation A50 ≥ 3%
Linear Thermal Expansion 2.4 mm/m at  100oC temperature difference
Polyethylene, Type LDPE 0.92 g/cm3
Lacquering Modified Polyester Lacquer System
Gloss (initial value) 30-85%
Pencil Hardness H
Acoustical Properties  
Sound Absorbtion Factor 0.05αs
Sound Transmission Loss 24Rw[dB]
Loss Factor 0.0057d
Thermal Properties  
Thermal Resistance 0.0080 1/Λ [m2K/W]
Heat Transition Coefficient 5.61k[W/m2K]
Temperature Resistance from -50oC to +80oC