Cement Grey Matt/Gloss Stone Effect Acrylic

Sturdy acrylic plastic sheets with a pleasing, granite-like aesthetic.

100 100

Rectangle (Standard Sheet)

cm
mm
inches

Specify your corner radii in mm.
We will assume the orientation of your sheet matches the diagram below. To leave a corner square enter a value of 0.

Please note, there is not a standard radius. If you are unsure, we would recommend that the radius is equal to the sheet thickness. I.e. 3mm thick material would have a 3mm radius corner.

Rounded edges box

1000mm

1000mm

NB Drawing is not to scale.

mm
mm
mm
mm

This feature gives you the ability to have your sheet pre-drilled with four holes (one in each corner) for easy mounting.

For panels with a longest side of over 1000mm we recommend two extra holes for wall mounting to reduce flex. These will be placed half way along the longest side at no extra charge. If you require these extra holes please specify in the special instructions at the checkout.

mm
mm
Drill location square
Specify your location for these holes by entering a value in mm for the distance between the edge of the sheet and the center of the hole as shown in the diagram by x or y.

Please note: If you do not upload a sketch, we will contact you via email to arrange this after your order has been placed. This may delay your order.
Sheet Cost: £144.04 Inc. VAT
£120.03 Excl. VAT
Product Temporarily out of Stock

If you would like to be emailed when this product becomes available, please fill out this form.

Email Address:
Contact Name:

Circular Sheets

cm
mm
inches
Sheet Cost: £144.04 Inc. VAT
£120.03 Excl. VAT
Excl. Cutting Cost: £10.95 per unique size
Product Temporarily out of Stock

If you would like to be emailed when this product becomes available, please fill out this form.

Email Address:
Contact Name:

Bespoke

We have the knowledge, experience and technology to cut sheets to any shape possible. Please provide as much information on your size and design requirements and we will get back to you with a no obligation quote within 2 working days. You may also upload up to 5 files containing sketches or technical drawings to assist our designers with providing an accurate quote.

Upload files (Optional). Each image must be less than 8MB in size in order for it to upload.

Suitable for a wide range of potential applications, our Cement Grey Stone Acrylic is an incredibly versatile material with an impact resistance 10 times that of glass. Complete with one matte surface and one glossy surface, the attractive aesthetics of stone acrylic will never fade; even when exposed to direct sunlight day after day. 

Features: 

  • Recyclable
  • Impact resistant
  • Food safe material
  • Impressive workability 
  • Half the weight of glass
  • One side matte / one side gloss
  • Low maintenance & easy to clean
  • Waterproof, weatherproof & shatterproof
  • Colour will not yellow or tarnish when exposed to UV light
  • Supplied with protective film on both sides

A popular material amongst DIY enthusiasts, acrylic is a very easy material to work with. It can be cut, drilled and routed using common household tools, and it can also be fixed directly onto any substrate so long as you are using the correct adhesive or have pre-drilled the holes. 

As well as being completely immune to the effects of the sun, this Cement Grey Matt/Gloss Stone Acrylic is also 100% waterproof and weather-resistant, which means that it can be used or left outside for as long as you want, without sustaining any damage.  

Please note that there is a lead time of approximately 2-3 weeks on this product.

Please note: As this material can be used with either the matte or gloss side facing outwards, if you require wall socket / corner cut outs, please let us know your desired orientation using the special instructions box in the checkout.

What our customers say about our service...

"Just to let you know my order arrived safely. I am really pleased with the result. I was finishing off a kitchen in a house I let, kitchen has cost more than I budgeted for and the quote for tiles and tiling was high. I bought the upstands from you and as a woman of 60 plus with no diy skills I have fitted them and they look great. Saved me a fortune and the tenants are thrilled."
Pat

Delivery Rates

Standard UK Mainland

Delivery Service        Est. Delivery Time Cost (exVAT) Cost (incVAT)
Economy 5 - 7 working days £10.89 £13.07
Standard 3 - 4 working days £16.95 £20.34
Express 1 - 2 working days* £29.85 £35.82
Nominated (Mon-Fri) N/A £20.00 £24.00
Nominated (Sat) N/A £25.00 £30.00
FREE ECONOMY DELIVERY ON ALL ORDERS OVER £100

*For orders placed before 12pm. For orders placed after 12pm this service is 2 - 3 working days.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from our customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadlines are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no questions asked.

How quickly will my order arrive?

We now offer several delivery services to best suit our customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 894463 or [email protected] for more information.

Nominated Delivery (request a delivery date)

Our nominated delivery service allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm then the earliest available date will be 4 working days from the current date. If your order is placed after 12pm then the earliest available date will be 5 working days from the current date.

Sundays and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 894463 or [email protected] Please include your full name and order number in all communications with us.

Packaging information

We have an excellent relationship with our courier service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select 'collect in person' from the delivery options in the checkout. All orders collected in person will not incur any delivery charges.

There are currently no FAQ's at present, please fill in the form if you wish to ask us a question about this products

Ask a question about this product

  • All questions answered within 24hrs (Mon - Fri).
  • We will only use your email address to respond to the question.
  • Questions may be displayed on the website after moderation (name and email address will not be dispayed).
  • Looking for a different thickness?

Design & Fabrication

Despite our name, at Cut Plastic Sheeting we can do much more than just cut to size sheets.

We also offer a bespoke design and fabrication service for plastic sheets to cater for almost any idea you can think of.

We have access to some of the UK's leading plastic engineers and designers to bring your project to life and our highly adaptable team can cater for all projects no matter how big or small.

Here are some of the services we offer:

  • Cut outs for sockets
  • CNC laser cutting
  • CNC routing
  • Laser engraving
  • Diamond polishing
  • Digital printing
  • Drilling
  • Heat bending

Please get in touch to discuss your requirements.

email: [email protected]

phone: 01752 917434