White High Gloss Acrylic Sheet
White High Gloss Acrylic Sheet additional 1White High Gloss Acrylic Sheet additional 2White High Gloss Acrylic Sheet additional 3White High Gloss Acrylic Sheet additional 4White High Gloss Acrylic Sheet additional 5White High Gloss Acrylic Sheet additional 6White High Gloss Acrylic Sheet additional 7White High Gloss Acrylic Sheet additional 8White High Gloss Acrylic Sheet additional 9White High Gloss Acrylic Sheet additional 10
product badges
Cut To Size
Optional Extras:

Polishing the edge of a sheet will remove any marks left from cutting and give a crisp, clean look. If the material is clear, then you will be able to see through to the other side.

Please enter any additional information to help us complete your order.

For drilled holes or polished edges, please see the ‘Optional Extras’ above.

£138.32 inc VAT£115.27 ex VAT


Item has been added to your cart


Width: 1189mmHeight: 841mm
£138.31inc VAT£115.26ex VAT

Item has been added to your cart


Width: 841mmHeight: 594mm
£69.10inc VAT£57.58ex VAT

Item has been added to your cart


Width: 594mmHeight: 420mm
£34.51inc VAT£28.76ex VAT

Item has been added to your cart


Width: 420mmHeight: 297mm
£17.26inc VAT£14.38ex VAT

Item has been added to your cart


Width: 297mmHeight: 210mm
£8.63inc VAT£7.19ex VAT

Item has been added to your cart


Width: 210mmHeight: 148mm
£4.30inc VAT£3.58ex VAT

Item has been added to your cart

2440mm x 1220mm (8ft x 4ft)

Width: 1220mmHeight: 2440mm
£411.74inc VAT£343.12ex VAT

Item has been added to your cart


We have the knowledge, experience and technology to offer a bespoke design and fabrication service for plastic sheets to cater for almost any idea you can think of.

Please provide as much information on your size and design requirements and we will get back to you with a no obligation quote within 2 working days. You may also upload up to 5 files containing sketches or technical drawings to assist our designers with providing an accurate quote.

Here are some of the services we offer:

  • Cut outs for sockets
  • CNC laser cutting
  • Laser engraving
  • Diamond polishing
  • Digital printing
  • Drilling

Trade and volume orders

We have extensive experience working closely with a wide range of businesses to deliver excellent value. From full sheets in bulk to cut to size requirements and everything in between, our knowledgeable team will work to exceed your expectations.

Simply fill out the enquiry form below and we will provide a quote within 2 working days

Upload files (Optional). Each image must be less than 8MB in size in order for it to upload.

Click to upload your image
Click to upload your image
Click to upload your image
Click to upload your image
Click to upload your image
  • Public Sector Organisations
    Instant credit available. Call us to find out more.
    Call us on 01752 917434 for discount prices
  • Found a better price?
    Call us on 01752 917434 and challenge us to beat it!

Extruded acrylic sheets are durable, cost-effective and a great general purpose acrylic for use in the home, in businesses, in exhibition spaces or wherever high quality presentation is needed. Plexiglas Hi-Gloss is a major step forward in aesthetic acrylic sheets.

Key Features:

  • A cost effective and lightweight alternative to glass
  • UV absorbent
  • High-gloss with brilliant depth of colour
  • Impact resistant
  • Fire Rating: E (Test Standard: DIN ED 13501)
  • Supplied with protective film on both sides

The surface of the acrylic is upgraded with a layer of high-gloss colour on only one side, which creates a superbly vivid and deep colour thanks to the light saturation of the clear acrylic sheet on the upper surface. Bonded together in the extrusion process, the layers of this acrylic are completely inseparable as with any other extruded sheet to guarantee a perfect finish.

Hi-Gloss acrylic sheets can be used wherever exclusive presentation is required, but they are especially ideal for use as acrylic kitchen splashbacks. Available in a wide variety of colours to suit all tastes and designs, they are an ultra-modern and functional way to update your kitchen.

Please Note: Hi-gloss acrylic sheets are not suitable for use at the rear of gas/electric hobs or near any heat source.


Common applications where the aesthetic of high gloss acrylic is employed include:

  • Bathroom splashbacks
  • Kitchen splashbacks
  • Presentation boards
  • Retail displays
  • Wall cladding
  • Signage

Customer Reviews4.95 4.9/5 Based on 8 reviewsShow all reviews


GreatReviewed by Adele.walker13762 on 12 Nov 2018

Product was great found it easy to order


Nice Bit of PlasticReviewed by Mmistry on 03 Sep 2018

Hard to review a sheet of plastic but fulfilled all of my expectations. Packaging was absolutely spot on and arrived very quickly. I will definitely be using these guys again.


High gloss white acrylicReviewed by Anonymous on 10 Jan 2017

Purchased high gloss white arclyic for my kitchen came well packaged etc however be carefull when fitting as the board has protection film on both sides one side has letters and numbers on the film and the other side was clear my joiner assumed the side with letters and numbers was the back therefore was fitted the wrong way around some may think the joiner was in the wrong but I've asked the question and feedback is that when you buy new items then any letters and numbers are on the back of products not the front


Toilet Cistern SplashbackReviewed by Steve on 02 Nov 2016

I recently purchased a new close fitting toilet cistern with had a white glass front. I found due to the layout of my toilet waste pipes It was impossible to fit the new cistern without breaking the glass front. I replaced the glass sheet with a 900mm x 550mm x 6mm white high gloss acrylic sheet from Cut Plastic Sheeting.The look is the same as the original white glass. But using plastic allowed me to cut a keyhole into the plastic sheet and the cistern framework to allow me to fit the Toilet pan to the close fitting cistern and connect easily to the waste pipe. The quality of the product supplied by Cut Plastic Sheeting is 1st Class, very accurately produced and well packaged. I fully recommend this company for their product and service.


Lovely finishReviewed by Kat on 04 Nov 2015

Can't wait to see the end result - I am refurbishing an old unit with a damaged top & have ordered the plastic to replace the top. The order arrived quickly, very well packaged & I can't wait to see th sheet in situ,

Delivery Rates

Standard UK Mainland

Delivery Service       Est. Delivery TimeCost (exVAT)Cost (incVAT)
Standard3 - 6 working daysFREEFREE
Express**2 - 3 working days*£12.95£15.54
Nominated (Mon-Fri)N/A£20.00£24.00
Nominated (Sat)N/A£25.00£30.00

*For orders placed before 12pm (Midday). For orders placed after 12pm (Midday) this service is 3 - 4 working days.

**Express delivery is available on certain products only. You may select your shipping option during the checkout.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from our customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadlines are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no questions asked.

How quickly will my order arrive?

We now offer several delivery services to best suit our customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 917434 or info@cutplasticsheeting.co.uk for more information.

Sample delivery rates

All samples are delivered free of charge.

Nominated Delivery (request a delivery date)

Our nominated delivery service allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm (Midday) then the earliest available date will be 4 working days from the current date. If your order is placed after 12pm (Midday) then the earliest available date will be 5 working days from the current date.

Sundays and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer service and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 917434 or info@cutplasticsheeting.co.uk. Please include your full name and order number in all communications with us.

Packaging information

We have an excellent relationship with our courier service and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select 'collect in person' from the delivery options in the checkout. All orders collected in person will not incur any delivery charges. Our premises is located in Lee Mill Industrial Estate, Devon.

PropertiesPlexiglas Hi-Gloss Test Standard 
Impact strength (Charpy, unnotched) 

16 KJ/m2

ISO 179/1 fu
Tensile strength77 MPaISO 527-2/1B/5
Elastic modulus3300 MPaISO 527-2/1B/5
Nominal strain at break7.6%ISO 527-2/1B/5
Max. thickness tolerance for 6.0mm


ISO 7823-2
Indentation hardness H961/80180 MPaISO 2039-1
Pencil hardness4H ASTM D 3363-92a

Coefficient of linear thermal expansion (0…50oC)

7oCDIN 53752-A
Vicat softening temperature109oCISO 306, B50
Heat deflection temperature under load HDT (1.8 MPa)102oCISO 75
Forming temperature (IR heating)140...160oC -
Max. permanent service temperature79oC -
Ignition temperature430oC DIN 51794
Smoke gas volumevery little DIN 4102
Smoke gas toxicitynon DIN 53436
Smoke gas corrosivenessnon -
ClassB2 BS476, Tao;7+6
 Class 3 BS2782
 TP (b) Methode 508A
ClassE DIn EN 13501
Resistance to high temperatures according to the standard for acrylic sanitaryware √ ≥ 105oCEN 263
Resistance to chemicals according to the standard for acrylic sanitaryware √ 5 Test mediaEN 263
Resistance to wet/dry cycling according to the standard for acrylic sanitaryware √ 20 cyclesEN 263

1.19 g/cm3

ISO 1183

Water absorption (24 h, 23oC) from dry state specimen 50 x 50 x 2mm

40mgISO 60, Method 1
Is this product suitable for laser cutting?
Yes, laser cutting works very well with this product.
Can I collect my order locally?
Yes, you may collect your order from our depot in Lee Mill Industrial Estate, Devon. Please select "Collect In Person" at the checkout.