Aubergine Purple Acrylic Sheet | Gloss Finish | 3 MM | CPS
01752 917434 [email protected]
£00

INSTANT

cut to size prices

FREE DELIVERY

on all mainland UK orders

OUTSTANDING

customer service

DISCOUNT PRICES?

Click to find out more

Aubergine Purple Acrylic Sheet (Gloss Finish)

Aubergine Purple Acrylic Sheet (Gloss Finish)
Aubergine Purple Acrylic Sheet (Gloss Finish)

VOLUME DISCOUNT

Ordering larger quantities worth over £500? Contact our Sales Team for a discounted price

EXPRESS DELIVERY

Available on Selected Materials & Clear Acrylic. See Delivery Details

ACRYLIC & SHEET MATERIAL SUPPLIER

Need frequent sheet materials? Speak to our Commercial Team about your needs

Aubergine Purple Acrylic Sheet (Gloss Finish)

Stunning Aubergine purple acrylic sheet cut to size.

Cut to Size Standard Sizes Bespoke & Trade

Option:

Clear
mm cm inches

Min: 100mm    Max: 2030mm.Please enter a height between 100mm - 2030mm or for sizes below 100mm, please contact our sales team.

Min: 100mm    Max: 3000mm.Please enter a width between 100mm - 3000mm or for sizes below 100mm, please contact our sales team.

Min: 100mm    Max: 2030mm.Please enter a diameter between 100mm - 2030mm or for sizes below 100mm, please contact our sales team.

Quantity:QTY:

Polishing the edge of a sheet will remove any marks left from cutting and give a crisp, clean look. If the material is clear, then you will be able to see through to the other side.

Polished finishing cannot be added to a sheet larger than 1500mm

Please check the orientation of your sheet matches the diagram above when specifying rounded corners.
The number entered will define the radius of your rounded corners.

Please note, the diagram will not accurately show the radius entered.

Top Left
mm
Top Right
mm
Bottom Left
mm
Bottom Right
mm

Please enter the radius for at least one corner

Please check the orientation of your sheet matches the diagram above when specifying drilled holes.

Specify your location for the holes by entering a value in mm for the distance between the edge of the sheet and the centre of the hole. Holes placed in corners will be spaced evenly from both edges.

Hole Diameter must be between 5mm and 50mm

The hole location you entered places the edge of the hole too close to the edge of the sheet, the minimum hole location for your hole diameter is 15mm

Show MoreShow Less
mm cm inches

Sizes can be between 100mm and 2030mm or for sizes below 100mm, please contact our sales team.

Sizes can be between 100mm and 2030mm or for sizes below 100mm, please contact our sales team.

Sizes can be between 100mm and 2030mm or for sizes below 100mm, please contact our sales team.

Sizes can be between 100mm and 2030mm or for sizes below 100mm, please contact our sales team.

Please enter any additional information to help us complete your order.
For drilled holes or polished edges, please see the ‘Optional Extras’ above.

£0.50 inc. VAT

(each)

£0.42 ex. VAT

Request Sample

We understand it's important to see the quality of our products before you commit to a big order, which is why you can order samples to help decide which product is best suited to your needs.

Our samples are approximately 75mm x 75mm but sizes may vary slightly depending on availability. We cannot offer samples in any specific thickness.

We will charge £2.50+VAT (free delivery) for this service but we will automatically reimburse you this charge if you go on to make an order on the site of over £50.00 excluding VAT and delivery.

**Please note: To receive your sample refund, please contact our sales team AFTER you have placed your full order to set up your sample refund. Only the sample relating to your full order will be eligible for reimbursement.**

600 x 400

Width: 600mm-Height: 400mm

£12.19 inc. VAT

(each)

£10.16 ex. VAT

Request Sample

We understand it's important to see the quality of our products before you commit to a big order, which is why you can order samples to help decide which product is best suited to your needs.

Our samples are approximately 75mm x 75mm but sizes may vary slightly depending on availability. We cannot offer samples in any specific thickness.

We will charge £2.50+VAT (free delivery) for this service but we will automatically reimburse you this charge if you go on to make an order on the site of over £50.00 excluding VAT and delivery.

**Please note: To receive your sample refund, please contact our sales team AFTER you have placed your full order to set up your sample refund. Only the sample relating to your full order will be eligible for reimbursement.**

Full Sheet (2030mm x 3000mm)

Width: 3000mm-Height: 2030mm

£309.25 inc. VAT

(each)

£257.71 ex. VAT

Request Sample

We understand it's important to see the quality of our products before you commit to a big order, which is why you can order samples to help decide which product is best suited to your needs.

Our samples are approximately 75mm x 75mm but sizes may vary slightly depending on availability. We cannot offer samples in any specific thickness.

We will charge £2.50+VAT (free delivery) for this service but we will automatically reimburse you this charge if you go on to make an order on the site of over £50.00 excluding VAT and delivery.

**Please note: To receive your sample refund, please contact our sales team AFTER you have placed your full order to set up your sample refund. Only the sample relating to your full order will be eligible for reimbursement.**

Description

**EXCLUSIVE COLOUR TO CUT PLASTIC SHEETING**

Key Features:

  • Low maintenance
  • Impact resistant
  • Attractive colour
  • Glossy surface finish
  • Supplied with protective film on both sides
  • Class E DIN EN ISO 13501-1 fire rating

This attractive Aubergine purple sheets can be ordered cut to size and installed in minutes to create a hygienic and modern wall covering for all or part of any domestic or commercial food preparation area. It displays all of the high performance qualities expected of our acrylic including high impact and scratch resistance, flawless surface finish and a resistance to the build-up of dirt.

All of our plastic sheets are easily maintained with a soft cloth and warm soapy water, with no need for harsh chemicals or abrasives which may damage the acrylic.

 

Important Notes

  • To get an accurate representation of the colour, please order a sample as computer displays can differ
  • We recommend all acrylic sheets are not installed closer than 200mm to an open heat source such as a gas/electric hob.
  • Our machines work to a tolerance of +/- 1mm. Please enter your requirements to the nearest whole mm.
  • Due to the manufacturing process of cast acrylic, the thickness of the sheet has a maximum tolerance of +/-10%.

Delivery Rates

*For orders placed before 12pm (Midday). For orders placed after 12pm (Midday) this service is 3 - 4 working days.

**Express delivery is available on certain products only. You may select your shipping options during the checkout.

Please note some postcodes e.g. Scottish Islands, Isle of Wight may incur excess shipping charges, we reserve the right to request this from out customers before shipment. If you do not want to incur this additional cost you may cancel your order and obtain a full refund.

All delivery deadline are subject to stock availability - in the unlikely event that we cannot meet your delivery expectations we will contact you immediately to make alternative arrangements. If you are unhappy with what we can offer then you are entitled to a full refund no-questions asked.

How Quickly will my order arrive?

We now offer several delivery services to best suit out customers needs. Please see the shipping rates table for estimated delivery times associated with each service.

 We are very proud of our excellent customer service so if you have a deadline, or require your order delivered to a non-mainland UK address which may take slightly longer, please do not hesitate to contact us on 01752 917434 or [email protected] for more information.

Sample Delivery Rates

All samples are delivered free of charge.

Nominated Delivery (request a delivery date)

Out nominated delivery services allows you to specify a day which your order is delivered on. Simply select nominated delivery in the checkout and then choose the date most convenient for you.

If your order is placed before 12pm (Midday_ then the earliest available date will be 4 working days from the current date. If your order order is placed after 12pm (Midday) then the earliest available date will be 5 workings days from the current date.

Sunadys and Bank Holidays are not available for nominated delivery. Currently nominated delivery is only available for UK mainland addresses only.

How can I track the status of my order?

We pride ourselves on great customer services and communication – during the order process you will receive several emails to keep you up to date with the status of your order and also when it has been dispatched. If you require extra information please contact our customer support team on 01752 917434 or [email protected]. Please include your full name and order number in all communications with us. 

Packaging information

We have an excellent relationship with our courier services and all orders are meticulously packed using a variety of materials to ensure the sheets arrive in excellent condition. Where necessary, larger sheets may be shipped on a pallet(s) to guarantee against breakage.

Delivery to alternate address

If you require your order to be sent to an address different to the billing address you may do this during the checkout process.

Collecting orders in person

If you wish to collect your order in person please select ‘collect in person’ from the delivery options in the checkout.All orders collected in person will not incur any delivery charges. Our premises is located in Lee Mill Industrial Estate, Devon.

Related products

PUBLIC SECTOR ORGANISATIONS

Instant credit available. Call us to find out more.

VOLUME DISCOUNT

Ordering larger quantities? Contact our sales team for a discounted price

FOUND A BETTER PRICE?

Call us on 01752 917434 and challenge us to beat it!

ASK A QUESTION

Ask about this product

ASK US